D-Link DCS-932L User Manual page 37

Section 3 - Configuration
After you have completed the setup of the DCS-932 outlined in the Quick Installation Guide you will have an operating camera that has
an assigned IP Address. Because you are using a router to share the Internet with one or more PCs, the IP Address assigned to the
Network Camera will be a local IP Address. This allows viewing within your Local Area Network (LAN) until the router is configured to
allow remote viewing of the camera over the Internet.
1. Assign a Local IP Address to Your Camera
Run the Setup Wizard program from the CD included with the DCS-932. Follow the steps in the Quick Installation Guide to configure the
DCS-932. The camera will be assigned a local IP Address that allows it to be recognized by the router. Write down this IP Address for
future reference.
This is the IP Address assigned to your camera (192.168.0.120 is only an example). You will probably have a different IP Address.
Your Camera's IP Address
D-Link DCS-932 User Manual
DCS-932
37