Auxiliary Input Socket; Pairing Your Bluetooth ® Device - Makita DMR108B Instruction Manual

Job site radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
2. Press and hold the buzzer alarm button
symbol and the display hour will flash along with a
beep.
3. During buzzer alarm symbol
Tuning control knob
Tuning control knob
Then rotate the Tuning control knob
minute and press Tuning control knob
minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
Press the Tuning control knob
setting.
Note:
There is no volume adjustment for buzzer alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power button
.
Disabling/cancelling alarms
To disable an active alarm, either press the Power button
, or press and hold the corresponding alarm button
to cancel the alarm.
Snooze
1. When the alarm sounds, press any button other than
the Power button
5 minutes. "SNOOZE" will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Menu/Info button
setting.
3. Rotate the Tuning control knob
appears on the display, then press the Tuning control
knob
to enter the setting. Rotate the Tuning control
knob
to adjust the silence time from 5, 10, 15 and
20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is
suspended, press the Power button
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 60, 45, 30, 15, 120 and 90 minutes.
1. Press and hold the Power button
Sleep Timer setting. "SLEEP XX" will show on the
display.
10
, the
flashes, rotate
to select the hour and press
again to confirm hour setting.
to select the
to confirm
to confirm the
will silence the alarm for
to enter the menu
until "SNOOZE X"
.
to enter the
2. Keep holding the Power button
Timer options will start switching on the display. Stop
until the desired Sleep Timer setting appears on the
display. The setting will be saved and the LCD will
return to normal display.
3. Your radio will switch off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer icon
will show on the display indicating an active Sleep
Timer.
4. To cancel the Sleep Timer function before the preset
time has elapsed, simply press the Power button
to turn the unit off manually.
Loudness
You can get compensation on lower and higher frequency
for your radio by adjusting the loudness function.
1. Press and hold the Menu/Info button
menu setting.
2. Rotate the Tuning control knob
"LOUD OFF" appears on the display. Press the Tuning
control knob
to enter the setting.
3. Rotate the Tuning control knob
turn on the loudness function, then press the Tuning
control knob
to confirm the setting.
4. To turn off the loudness function, select OFF and
press the Tuning control knob
setting.

Auxiliary input socket

Two 3.5 mm stereo Auxiliary Input sockets are provided.
One is at the front of your radio (AUX IN 1); the other is
located in the battery compartment (AUX IN 2).
1. Connect an external audio source (for example, iPod,
MP3 or CD player) to the Auxiliary Input socket.
2. Repeatedly press and release the Source button
until AUX IN 1or 2 is displayed.
3. Adjust the volume setting on your iPod, MP3 or CD
player to ensure an adequate signal level from the
player, and then use the Tuning control knob
radio as needed for comfortable listening.
Listening to Bluetooth
You need to pair your Bluetooth
before you can auto-link to play/stream Bluetooth
through your radio. Paring creates a permanent "bond" so
two devices can always recognize each other.
Pairing your Bluetooth
1. Press the Source button
function. "BT READY" will be shown on the display
and "READY" will flash with every 2 seconds interval.
®
2. Activate Bluetooth
device's user manual to allow the paring procedure.
and the Sleep
to enter the
until "LOUD ON" or
to choose ON to
to confirm the
®
music
®
device with your radio
®
device
to select Bluetooth
on your device according to the
on the
®
music
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmr108Dmr108ar

Table of Contents