System Requirements; Hardware Installation - D-Link DCS-900 Quick Installation Manual

System Requirements

•
Java Enabled and Compliant Web Browser
•
CPU: Pentium III, 850MHz or above
•
Memory Size: 128MB
•
VGA card resolution: 800x600 or above
•
Existing 10/100Mbps Ethernet-Based Network

Hardware Installation

Attach the Swivel Stand
Locate the stand connector on the bottom panel of
the DCS-900 and screw on the swivel stand to the
base of the DCS-900.
Attach the External Power Supply
Attach the external power supply to the DC power
input connector located on the rear panel of the
DCS-900 and connect it to your local power supply.
Note: Power source is confirmed when the green
LED Power Indicator located to the right of the lens
on the DCS-900 is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network
cable connector located on the back panel of the
DCS-900 and attach it to the network. Network
Connectivity is confirmed when the orange LED
Indicator on the DCS-900 located below the Power
LED is illuminated.
2