Table of Contents
Advertisement
DISASSEMBLY PROCEDURES
1. Removal of Top Cover
Remove 8 screws ( q and w ) and then remove the Top Cover in Fig. 1.
2. Removal of Front Panel Unit
a. Remove 9 screws ( e, r and t ) in Fig. 1.
b. Remove CB104, CB303 and ground wire.
c. Lift 2 hooks and then remove the Front Panel Unit in Fig. 1.
Front Panel Unit
3. Removal of Sub Chassis Unit
Remove 4 screws ( y ) and then remove the Sub
Chassis Unit in Fig. 2.
4. Removal of DSP P.C.B.
a. Remove 4 screws ( u ) and then remove the Shield
Case Cover in Fig. 3.
b. Remove 7 screws ( i and o ) and then remove the
DSP P.C.B. in Fig. 3.
Sub Chassis Unit
y
(Remove parts in the order as numbered.)
Top Cover
q
e
r
t
y
Fig. 2
RX-V620/HTR-5460/RX-V620RDS
w
q
Hooks
u
Shield Case Cover
u
i
u
i
DSP
w
Fig. 1
o
Fig.3
8
Advertisement
Table of Contents
