Section 2: Installation
The DCS-6010L can be focused by adjusting the lens.
Step 1
Place the camera on a non-slip surface.
Step 2
Remove the cover by following the steps outlined in "Internal Ports" on page 8.
Step 3
Adjust the focus by rotating the lens in a clockwise or counter clockwise direction
until satisfied.
Step 4
Ensure the cables are seated in the cable channel.
Step 5
Seat the cover and rotate to align the cable channel guide over the cable channel.
D-Link DCS-6010L User Manual
Focusing the Camera
3
4
5
23