Table of Contents
Advertisement
Section 3 - Configuration
This page lets you both save and delete settings on your DHP-W310AV.
Save Settings To
Use this option to save the current DHP-
Local Hard Drive:
W310AV configuration settings to a file on
the computer you are using. Click the Save
button. You will then see a file dialog where
you can select a location and file name for
the settings.
Load Settings From
Use this option to load previously saved DHP-
Local Hard Drive:
W310AV configuration settings. Click Browse
to find a previously saved configuration file.
Then, click the Upload Settings button to
transfer those settings to the DHP-W310AV.
Restore to
This option will restore all configuration
Factory Default
settings back to the settings that were in effect at the time the DHP-W310AV was shipped from the factory. Any settings that
Settings:
have not been saved will be lost, including any rules that you have created. If you would like to save the current DHP-W310AV
configuration settings, use the Save button above.
Reboot the
Click to reboot the DHP-W310AV.
Device:
Clear Language
Clears any language pack that is currently installed. For more about language packs, refer to "Firmware" on page 25.
Pack:
D-Link DHP-W310AV User Manual
System
24
Advertisement
Table of Contents
