Yamaha AW2816 Owner's Manual page 78

Let's record on the AW2816
3
6
To enable the Solo function, press the
[SOLO] key.
The [SOLO] key and [ON] keys 1–8 will blink.
7
Use the keys of the MIXING LAYER section
to select the desired mixing layer, and use
the [ON] keys to select the channel that
you want to solo.
The corresponding channel will be soloed, and
all other [ON] keys will go dark.
Operation while the Solo function is enabled will
depend on the settings of the SETUP screen Solo
Setup page.
8
To defeat the Solo function, press the
[SOLO] key once again.
70
Operation section