Transport Key Functions - Yamaha AW2816 Owner's Manual

Chapter
6
Transport operations for the recorder are performed
using the five keys of the Transport section (the trans-
port keys). The function of each transport key will
Running mode /
Transport key
+
* : Recording will be executed only if one or more of the REC TRACK SELECT [1]–[16]/[ST] keys are blinking.
– : Key does nothing.
Transport operations and Locate operations cannot be
performed when the SONG, FILE, CD, or EDIT
screens are shown in the display.
Fast forward-play/Fast reverse-play
While the transport is stopped or playing, you can
operate the [SHUTTLE] dial to play fast-forward (cue)
or play in reverse (review). This is referred as the
"Shuttle function."
The speed of cue or review will change according to
the angle of the [SHUTTLE] dial, as shown in the illus-
tration at right. When the [SHUTTLE] dial is returned
to the center, the Shuttle function is defeated, and the
transport will return to the previous state (stopped or
playing).
Transport/Locate operations
This chapter explains transport and locate operations on the AW2816.

Transport key functions

Stopped Playing
— Stop
Play back —
Rewind Review
(8x speed) (8x speed)
Fast-forward Cue
(8x speed) (8x speed)
Record*
Record*
(punch-in)
(the Shuttle function)
change depending on the current state (running
mode) of the transport. The following chart shows the
function of each transport key in each running mode.
Review
Rewinding
(rewind-play)
Stop Stop
Play back Play back
Switch Switch review
rewind speed speed
(8x 16x) (8x 16x)
Fast-forward Cue
(8x speed) (8x speed)
Play back Play back
Backward
–2
–4
–8
–16
Operation section
Fast- Cue
forward (play-fast-forward)
Stop Stop
Play back Play back
Rewind Review
(8x speed) (8x speed)
Switch fast- Switch cue
forward speed speed
(8x 16x) (8x 16x)
Play back Play back
Forward
Stop
–1/4 +1/4
–1/2 +1/2
+1(normal speed)
–1
+2
Recording
Stop
Play back
(punch-out)
—
6
—
—
+4
+8
+16
95