Controls And Functions; Front Panel - Yamaha R-N303 D Owner's Manual

Front panel

1 2
PHONES SPEAKERS
C D
1 A (power)
Turns on/off (standby) the unit.
2 STANDBY/ON indicator
Brightly lit: Power is on
Dimly lit: Standby mode
Note
When not using this unit for an extended period of time, be sure
to unplug it from the power outlet. This unit uses a minimal
amount of power even in standby mode.
3 Front display
Shows information about the operational status of this
unit (p. 6).
4 DISPLAY
Selects the information displayed on the front display
(p. 20).
5 MODE
Sets the FM band reception mode to automatic stereo
or monaural (p. 22).
6 MEMORY
Registers the current radio station as a preset when
TUNER is selected as the input source (p. 23, 27).
Registers the current playback song or streaming
station as a preset when NET are selected as the input
source (p. 36).
7 BAND
Sets the radio tuner band when TUNER is selected as
the input source. (p. 22, 26)
4
En

Controls and functions

3 4 5 6 7
DISPLAY MODE MEMORY BAND
BASS TREBLE
E F
8 9 0 A B
Wi Fi
BLUETOOTH
PRESET TUNING
SELECT
INPUT PUSH ENTER
G H
8 PRESET j / i
Recalls a preset radio station (p. 24, 22) or song/
streaming station (p. 36).
9 BLUETOOTH indicator
Lights up when the unit is connecting to a Bluetooth
device.
0 Wi-Fi indicator
This lights when connecting to a wireless network, or
when the unit is operating as an access point.
It also lights up if you register the unit with the
MusicCast CONTROLLER app, even if the unit is
connected to a wired network.
A Remote control sensor
Receives infrared signals from the remote control.
B TUNING jj / ii
Selects the tuning frequency (p. 22) or a DAB radio
station (p. 26) when TUNER is selected as the input
source.
VOLUME
RETURN
CONNECT
I J