Controls And Functions; Front Panel - Yamaha R-S202 Owner's Manual

Front panel

1
A B
A
1
(power)
Turns this unit on, or sets it to standby mode.
2 FM MODE
Changes the FM radio wave reception mode (stereo or
monaural) when TUNER is selected as the input
source (see pages 15, 20).
3 Remote control sensor
Receives infrared signals from the remote control.
4 STANDBY/ON indicator
Indicator
The power of this unit is "on".
Brightly lit
This unit is in "standby" mode.
Dimly lit
The power of this unit is "off".
Off
To turn off this unit, disconnect
the power cable from an AC
wall outlet.
2
En

CONTROLS AND FUNCTIONS

2 3 4 5 6
BAND
C D
Status
7 8 9 0
E
5 MEMORY
Stores the current radio station as a preset when
TUNER is selected as the input source (see
pages 16, 21).
6 BAND
Sets the radio tuner band when TUNER is selected as
the input source (see pages 15, 20).
7 PRESET j / i
Selects a preset radio station when TUNER is selected
as the input source (see pages 17, 22).
8 TUNING jj / ii
Selects the tuning frequency when TUNER is selected
as the input source (see pages 15, 20).
9 Bluetooth indicator
Indicates the status of the connection with the
Bluetooth device (see page 13).
0 Front panel display
Shows information about the operational status of this
unit (see page 4).
F