Table of Contents
Advertisement
5 Connections
Connect to the Internet
Connect Pi3100 to a wireless router (Access
Point). You can connect Pi3100 to the network
that is built around the router.
To connect to the Internet, make sure that the
router connects to the Internet directly and no
dial-up is required on the computer.
1
From the Home screen, tap
Wi-Fi.
2
Select the option to switch on the Wi-Fi
function.
» You see a list of Wi-Fi networks in
range.
3
Connect Pi3100 to a network:
Settings >
Connect to your PC
Connect Pi3100 to a PC through the USB
cable.
Do the following to transfer apps or media files
from your PC to Pi3100,the internal storage or
SD card:
•
a Tap to select a network.
b On the pop-up screen, enter the
password to the network.
is displayed in the status bar
»
when the Wi-Fi connection is
completed successfully.
» Next time you switch on Pi3100,
Pi3100 connects to the previously
connected network automatically.
Note
•
If MAC address filtering is enabled on your router, add
the MAC address of Pi3100 to the list of devices that
are allowed to join the network. To find the Wi-Fi MAC
Settings > About tablet > Status on
address, go to
the Home screen.
•
To refresh the list of networks, select
upper-right corner of the screen.
•
If you have disabled SSID broadcasting or hidden the
Service Set Identifier (SSID) of the router, manually
enter the SSID or public name for the network. Go to
Settings > Wi-Fi. On the top bar, select
•
If the DHCP (Dynamic Host Configuration Protocol)
is unavailable or disabled on the router, manually enter
the IP address of Pi3100.
In Windows Explorer, drag and drop apps
or media files from your PC to Pi3100.
> Scan at the
.
EN
13
Advertisement
Table of Contents
