Discs-Basic Play - Panasonic SC-HT900 Operating Instructions Manual

Discs—Basic play
TUNING
S.M PROGRESSIVE SELECTOR
V.R.S M.R.S
PROGRESSIVE
Í
DISC
SEQUENTIAL
SEQUENTIAL
PLAY MODE
∫
TOP MENU
TOP MENU
NAVIGATOR
342 1
ENTER
TV VOL s
%
SUBWOOFER
P.MEMORY
[RAM] [DVD-A] [DVD-V] [VCD]
Preparation
≥Press [Í] to turn on the unit.
≥Turn on the television and select the appropriate video input on the
television to suit the connections for the unit.
[1]
Press [DVD/CD] to select "DVD/CD" as
the source.
To enjoy progressive video
Press [PROGRESSIVE].
The television will be disrupted for a
moment but this is normal.
≥Output from this unit is interlace if you have connected to the
television through the VIDEO OUT or S-VIDEO OUT or
playing PAL discs, even if "PROG." is on the display.
≥When progressive output is on, closed captions will not be
displayed.
[2]
Press [<] to open the drawer and
place the disc(s) on the disc tray(s).
To load discs on the other trays, press [DISC SKIP] on the
RQT6750
main unit.
14
%
@ $
∫ ;
DOWN
TUNE MODE FM MODE MEMORY
DISC 1 2 3 4 5
DISC SKIP
Disc indicators
DISC EXCHANGE
AV SYSTEM TV VCR
!
DIGITAL
TV/VIDEO AUX TUNER/BAND DVD/CD
DISC
1 2 3
DISC 1
DISC 1 DISC 2 DISC 3
PAGE
GROUP
DISC 5
4 5 6
DISC 4 DISC 5
Numbered
7 8 9
buttons
REPEAT FL DISPLAY
S10/ENTER
CANCEL
0
SKIP SLOW/SEARCH
$
CH
;
MENU
MENU
DIRECT PLAY LIST
ENTER
DISPLAY RETURN
RETURN
TV VOL r
VOLUME
S.POSITION C.FOCUS
MIX 2CH
LEVEL SFC S.SRND PL
SLEEP AV EFFECT ZOOM SETUP
C.S.M P.MEMORY AUDIO MUTING
SUBTITLE
TEST DR COMP DELAY TIME
SHIFT
CH SELECT QUICK REPLAY SUBTITLE
QUICK REPLAY
[CD] [WMA] [MP3] [JPEG]
PROG.
If the disc contains both audio data (WMA and MP3) and
JPEG, check "Mixed Disc—Audio & Stills" setting in the
SETUP menu (➡ page 34). Select "Stills (JPEG)" or "Audio
@ #
, (MP3/WMA)".
≥Remove TYPE 2 and 4 discs
from their cartridges before use.
VOLUME
OPEN/CLOSE
[RAM]
UP
≥Label-up (With double-sided
DISC EXCHANGE DISC SKIP
discs, load so the label for the
side you want to play is facing
up.)
[3]
Press [<] to close the drawer.
[HT900]
[HT700]
[4]
Press [1] (play).
Play begins.
[WMA] [MP3] [CD] (CD text only)
Group and track names are displayed on the television.
≥Press [SUBTITLE] to turn the display on or off.
≥You can also use the navigation menus to control play
(➡ page 22).
[5]
Adjust the volume.
– – dB
(Minimum) (Maximum)
∫ To pause play
Press [;] during play.
Press [1] (play) to restart play.
∫ To stop play
Press [∫] (➡ page 15, Resume function).
∫ To select a disc
Press [DISC] and then the disc button ([DISC 1]–[DISC 5]).
∫ To prevent damage
Do not;
≥load more than one disc per tray.
≥touch the drawer or the carousel while they are in motion.
≥rotate the carousel by hand.
≥close the drawer by hand.
[Note]
≥If "$" appears on the television
The operation is prohibited by the unit or disc.
≥It may take some time for play to start but this is normal.
When a menu appears on the television
[DVD-A] [DVD-V]
Press the numbered buttons to select an
item.
To select a 2-digit number
Example: To select item 23, press [S10] ➡ [2] ➡ [3].
≥When playing DVDs, you can also use [3, 4, 2, 1] to select
items. Press [ENTER] to confirm your selection.
To return to the menu screen
[DVD-A] [DVD-V] [TOP MENU]: Shows the first menu screen.
[DVD-V] [MENU]: Shows the menu screen.
[VCD]
[RETURN]: Shows the menu screen.
[Note]
The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [∫] when you finish to preserve the
unit's motor and your television screen.
Play starts from the disc in
the front-left position.
A disc indicator lights up red to show a disc is
on the tray.
[HT690] A disc indicator lights up green to show a disc
is on the tray.
0 dB
[VCD]