Advertisement
TB7100A1000 MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT
PROGRAMMING
Table 7 shows default program settings.
Table 7. Energy Star Default Program Settings.
Schedule
Period
Time
Occ1
8:00am
Unocc1
10:00pm
Occ2
—
Unocc2
—
Fan Settings
Auto: Fan runs only when heating/cooling system is on.
See the Fan Schedule section for more information.
On: Fan runs continuously.
System Settings
Heat: Thermostat controls the heating system.
Off: Both heating and cooling systems are off. Fan is turned
off.
Cool: Thermostat controls the cooling system.
Auto: Thermostat automatically changes between heat and
cool operation, depending on indoor temperature.
Programming Heating and Cooling Schedule
The thermostat can control up to four different schedule
periods per day:
OCC 1: Work arrival time. Period to keep space at a
comfortable temperature.
UNOCC1: Work exit time. Period to keep space at an
energy-saving temperature.
OCC 2: Second occupied period.
UNOCC2: Second unoccupied period.
NOTE: Available schedule times are at 15-minute intervals.
Editing Schedule
1. Press MORE
2. Press SCHEDULE.
3. Press EDIT.
4. Press SELECT DAY to select the days you wish to
schedule.
5. Press NEXT when finished selecting days
NOTES:
—
Multiple days can be selected.
—
To skip over a day, press the Up or Down arrow
keys.
—
Checkmarks appear next to selected days. These
are scheduled with identical times and tempera-
tures.
63-2675—01
Setpoints
Heat
Cool
70°F (21°C)
75°F (24°C)
55°F (10°C)
85°F (29.5°C)
—
—
—
—
Fig. 35. Initial schedule edit screen.
6. OCCUPIED 1 flashes, denoting the period that is about
to be edited.
7. Press NEXT, and the start time for that period flashes.
8. Change the start time by pressing the Up and Down
arrow keys.
9. Press NEXT to edit the heating and cooling setpoints.
10. Continue to cycle through the remaining periods and
make changes by pressing the NEXT key.
DAYS
SELECTED
Mon
Tue
Wed
Thu
Fri
Go Back Next
GO BACK BUTTON
GOES BACK TO THE
LAST SCHEDULE STEP
NEXT STEP BUTTON
ADVANCES PERIOD,TIME,
HEAT AND COOL TEMPERATURES
Fig. 36. Screen to edit existing settings.
11. When complete, press DONE. SAVING CHANGES
appears on the screen to indicate changes are being
saved to the day(s) modified.
12. To exit schedule without saving changes, press CANCEL
any time.
Setting Time
1. Press CLOCK.
2. Use arrows to set current time.
3. Press DONE.
IMPORTANT
The current day of the week should already be set
correctly. If not, see the Advanced Settings section to
set the day.
16
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Select Day
Next
Step
Cancel
SCHEDULE
HEAT OR COOL
PERIOD
TEMPERATURES
UP ARROW
CHANGES TIME
AND
Period
Wake Leave
TEMPERATURES
AM
Heat
Step
Done
DOWN ARROW
CHANGES TIME
AND
TEMPERATURES
DONE BUTTON
EXITS AND SAVES
CHANGES MADE
TO SCHEDULE
M22332
M22333
Advertisement
