Table of Contents
Advertisement
7. THE CONTROL PANEL
1
Press the Power On/Off button (1). The End
Of Programme Indicator (3) will illuminate.
Select the programme that best suits your
dishes using the Programme Selection
button (2).
The light corresponding to the selected
programme (4) will illuminate and the End
Of Programme Indicator (3) will switch off.
NOTE: If you decide not to start the
selected programme, please see the
"Changing a Programme" and "Cancelling a
Programme" sections.
NOTE: When there is not enough
dishwasher salt, the Salt Lack Warning
Indicator (3) will illuminate indicating the salt
chamber needs filling.
NOTE: When there is not enough rinse
aid, the Rinse Aid Lack Warning Indicator
(3) will illuminate to indicate the rinse aid
chamber needs filling.
7.1. Changing a Programme
If you would like to change the programme
while in operation, follow the steps below.
4
Open the door and select a new program
using the Program Selection button.
After closing the door, the
new program started will
resume the course of the
old program.
NOTE: Open the door slightly at first to
avoid water spillage if you wish to stop the
wash programme before it is complete.
4
2
3
EN - 15
7.2. Cancelling a Programme
If you would like to cancel a programme
while in operation.
Open the door of your machine.
The light corresponding to the
selected program will illuminate.
4
Press and hold the Program Selection
button for 3 seconds. The End Of Program
Indicator wil flash and the program light will
switch off.
Discharge process starts after closing the door of
the machine.The machine discharges the water
inside it for about 30 seconds.When the program is
cancelled,your machine gives a buzzer sound for "5
times " and the "end of program indicator" turns on.
7.3. Switching the Machine Off
When the selected wash program is complete,
the End of Program Indicator will illuminate
and a signal will sound 5 times. You can then
switch your machine off using the Power On/
Off button.
Disconnect the plug and turn
the water tap off.
NOTE: Do not open the door before
the programme is complete.
NOTE: If the door of the machine
is opened or the power is cut off while
a programme is in operation, the
programmeme will continue when the door
is closed or the power returns.
NOTE: If the power is cut off or the
machine door is opened during the drying
process, the programme will terminate.
Your machine will now be ready for a new
programme selection.
Advertisement
Table of Contents
