Table of Contents
Advertisement
CONTROL PANEL
1
OPERATIONS (BUTTON)
Power
1
Press this button to turn on or turn off the dishwasher.
Heavy Duty
2
Heavy Duty cycle is for pots, pans, casseroles and
dinnerware with dried-on or baked on soil.
Normal
3
Normal cycle with Heated Dry will completely wash and
dry a full load of normally soiled dishes.
Delicate
4
Delicate cycle is for items that need special care such as
stemware or porcelain.
Express Wash
5
Express Wash cycle is for lightly soiled or well-rinsed
dish loads.
Rinse Only
6
Use for pre-rinsing dishes or glasses. This is only a rinse
that keeps food from drying on your dishes and reduces
odor buildup in your dishwasher until you are ready to
wash a full load.
Screen Features
7
To show the remaining program time and
error code etc.
To show the delay time.
To roughly show the progress of program
- - - -
operation.
Rinse Aid
If the icon is lit, the dishwasher is low on
dishwasher rinse aid and requires a refill.
Water Faucet
If the icon is lit, the water faucet closed.
Child Lock
If the indicator is lit, the child lock is on.
The Sanitized indicator light illuminates when
the cycle using the Sanitize option is finished.
The light turns off when the door is opened
or any button is pressed.
2
3
4
5
6
6
7
8
11
Half Load
8
When the load is about or less than half a typical load, use
the Half Load function, which washes and drys with less
water and energy.
Sanitize
9
Sanitize function is to sanitize dishes and glassware and
maintains the water temperature at 156.2°F (69°C). This
function is available with Heavy Duty, Normal, Delicate
or Express Wash cycles.
Heated Dry
10
Heated Dry option is for heat-drying dishes. Heated Dry
is not available for Rinse Only cycles.
Child Lock
11
Press this button to lock all controls and prevent children
from accidentally interacting with controls or settings.
Delay –
12
Press the – button to decrease the delay time.
Delay +
13
Press the + button to add the delay time. Maximum 24
hours delay can be selected
Start/Pause
14
Once the door is firmly closed, press Start/Pause to start
operation after selecting the cycle and options or delay
time settings.
If the cycle needed to pause while a washing cycle in
process, follow the steps below.
1. Open the door slightly and wait for a few seconds until
the washing cycle stops.
2. Open the door to add or remove items.
3. Close the door, and then press Start/Pause.
The washing cycle will automatically resume.
IMPORTANT: Open the door slightly and wait for the
spray arms and washing cycle to stop before opening the
door completely. This will help from being splashed with
hot water.
To cancel a washing cycle when the dishwasher is running,
press and hold Start/Pause for 3 seconds.
9
10
12
13
14
Advertisement
Table of Contents
