Advertisement
OPERATION
To install:
Insert the battery pack into the product as shown.
Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
product before beginning operation.
WARNING:
Make sure the latches on the sides of the battery
pack snap in place and the battery pack is fully
seated and secure in the blower battery port
before beginning operation. Failure to securely
seat the battery pack could cause the battery
pack to fall out, resulting in serious personal
injury.
To remove:
Depress the latches and remove the battery pack.
For complete charging instructions, refer to the Operator's
Manuals for your RIDGID battery pack and charger models.
STARTING/STOPPING THE BLOWER
See Figure 5, page 10.
The blower is equipped with a lock-on feature which is con-
venient when continuous operation for extended periods of
time is required.
To turn the blower on: Depress the switch trigger.
To turn the blower off: Release the switch trigger.
To lock on: Depress the switch trigger. Push the lock-on
button and release the switch trigger.
To release: Depress and release the switch trigger.
OPERATING THE BLOWER
See Figure 6, page 10
NOTE: Install the blower tube onto the blower outlet as
described previously.
To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the center
of a pile.
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 8 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy,
as well as a Three-year Limited Warranty. For Warranty and Policy details,
please go to powertools.ridgid.com or call (toll free) 1-866-539-1710.
ILLUSTRATIONS START ON PAGE 9.
To reduce sound levels, limit the number of pieces of
equipment used at any one time.
Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
After using blowers or other equipment, CLEAN UP!
Dispose of debris properly.
INFLATING
See Figure 7, page 10
NOTE: Install the inflator/deflator nozzle onto the blower
outlet as described previously.
Insert the inflator/deflator nozzle into the air port on the
inflatable item.
NOTE: For small inflatables, such as beach balls, attach
the tapered adaptor over the inflator/deflator nozzle.
Squeeze and hold the switch trigger to begin inflation.
When the item is fully inflated, release the switch trigger
to stop the flow of air.
Remove the nozzle from the inflated item and close the
item's air port.
NOTE: Maximum PSI for this unit is 0.5 PSI.
DEFLATING
See Figure 8, page 10
NOTE: Install the inflator/deflator nozzle onto the air intake
as described previously.
Insert the inflator/deflator nozzle into the air port on the
inflatable item.
Squeeze and hold the switch trigger to begin deflation.
When the item is fully deflated, release the switch trigger
to stop the tool.
Remove the nozzle from the deflated item and close the
item's air port.
7 — English
Advertisement
