Windows Xp Wireless Zero Configuration; Figure 5-4: Windows Xp Wireless Zero Configuration Icon; Figure 5-5: Network Connection - No Wep - Cisco Linksys WMP54Gv4 User Manual

Wireless-G PCI Adapter

Windows XP Wireless Zero Configuration

1. After installing the Adapter, the Windows XP Wireless Zero Configuration icon will appear in your computer's
system tray. Double-click the icon.
2. The screen that appears will show any available wireless network. Select the network you want.
If this network has WEP encryption enabled, go to step 3.
If this network does not have WEP encryption enabled, you will be asked to select a network. Make sure the
box next to Allow me to connect to the selected wireless network, even though it is not secure is checked.
Then, click the Connect button, and go to step 4.
Chapter 5: Driver Installation for Windows XP
Windows XP Wireless Zero Configuration
NOTE: Windows XP has a built-in configuration tool.
Use Windows XP Wireless Zero Configuration (in the
system tray at the bottom of your screen) to configure
the Adapter.
Figure 5-3: Windows XP Wireless Zero Configuration icon
NOTE: Steps 2 and 3 are the instructions and
screenshots for Windows XP with Service Pack 1
installed.
If you have not installed Service Pack 1, select the
network you want, and click the Connect button. If the
network has WEP encryption enabled, enter the WEP
key in the Network key field, and then click the
Connect button.
Figure 5-4: Network Connection - No WEP
14