Chapter 4: Connecting The Pci Adapter; Figure 4-1: Your Computer's Pci Slot With Adapter Installed - Cisco Linksys WMP54Gv4 User Manual

Wireless-G PCI Adapter

Chapter 4: Connecting the PCI Adapter

1. Before connecting the PCI Adapter to your PC, turn off your desktop PC.
2. Open your PC case and locate an available PCI slot on the motherboard. Check with your computer
manufacturer for instructions.
3. Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot's contacts. You may
have to apply a bit of pressure to slide the adapter all the way in. After the adapter is firmly in place, secure
its fastening tab to your PC's chassis with a mounting screw. Then, close your PC.

Figure 4-1: Your Computer's PCI slot with Adapter installed

Chapter 4: Connecting the PCI Adapter
IMPORTANT: Windows 2000, 98 SE, and ME users
must run the Setup Wizard to install the software
before connecting the PCI Adapter.
IMPORTANT: Windows XP users must connect the
PCI Adapter before installing the software, shown in
Chapter 5.
11