Table of Contents
Advertisement
30" (76.2 cm) SIMU530
Performance Boost function is available on only 1 surface
cooking area at a time within a zone. If you attempt to use
another surface cooking area in the same zone, "P" and
"9" will briefly flash in the display before returning to heat
setting level 9. The surface cooking area that was set to the
Performance Boost function will automatically reset to heat
setting level 9. See the following illustrations for zones.
A
P
P
B
Zone 1
A. Surface cooking area 1
B. Surface cooking area 2
8
D
P
P
OFF
OFF
SIM
SIM
MELT
MELT
SIM
SIM
MELT
MELT
OFF
OFF
TIMER
Power
Simmer
Melt
B
C
Zone 2
C. Surface cooking area 3
D. Surface cooking area 4
36" (91.4 cm) SIMU536
Perfomance Boost can be used on all surface cooking
areas at the same time.
A
P
P
B
Zone 1
Control
Lock
A. Surface cooking
area 1
B. Surface cooking
area 2
To Use:
1. Check that a surface cooking area has been selected.
2. Touch BOOST. "P" will appear in the display.
3. Touch BOOST keypad when finished. The "P" will no
longer be visible in the display, and the Performance
Boost function will no longer be active. The surface
cooking area turns back to heat setting level 9.
NOTE: The Performance Boost function may automatically
deactivate to keep the internal electronic components of the
cooktop from becoming too hot.
Use the cooking timer to set times up to 90 minutes. The timer
is independent of any other control settings. The timer can be
used only on one cooking zone at a time.
To Use:
1. Touch the TIMER keypad. "01" will appear in the
timer display.
2. Touch the ">" key to increase the time in 1-minute
increments.
OR
Touch the "<" key to decrease the time in 1-minute
increments.
3. The timer will start to count down after a few seconds.
To change the time, touch the time ">" or "<" keypads.
4. When the countdown is finished,"00" flashes and a tone
will sound.
NOTE: When the power is restored after an outage, the timer
will no longer be running.
C
P
OFF
OFF
OFF
SIM MELT
SIM
SIM
MELT
MELT
SIM
SIM
MELT
MELT
OFF
OFF
TIMER
Control
Power Simmer
Melt
B
B
Lock
Zone 2
C. Surface cooking
D. Surface cooking
area 3, dual
element with
E. Surface cooking
performance
boost
Timer
D
P
P
E
Zone 3
area 4
area 5
Advertisement
Table of Contents
