Configuring The Server; Configuring The Onboard Sata Controller - Fujitsu PRIMERGY TX2560 M2 Operating Manual

6.4

Configuring the server

This section contains information about configuring the server and installing the
operating system.
I
Make sure that the power saving functions are disabled in the Power
menu of the BIOS Setup during operation.
6.4.1

Configuring the onboard SATA controller

A SATA controller is integrated on the system board. You can configure the
onboard controller either before or during installation with the ServerView
Installation Manager. Using the ServerView Installation Manager is
recommended.
I
The controller has its own configuration utility. For further information,
refer to the "Embedded MegaRAID Software User's Guide" (on the
Fujitsu manuals server under x86 Servers - Expansion Cards - Storage
Adapters - LSI SAS / SCSI RAID Controllers).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.html
(for the global market).
http://www.fmworld.net/cgi-bin/drviasearch/drviaindex.cgi
(for the Japanese market).
I
In the system BIOS the onboard SAS/SATA controller can be configured
as "RAID" (default) or "non-RAID".
TX2560 M2 / RX2560 M2
Operating Manual
Starting up and operation
75