D-Link Air DWL-650 Manual page 13

Using the Configuration Utility (continued)
SSID:
Service Set Identifier is a name that identifies a
wireless network. Access Points and wireless
devices attempting to connect to a specific WLAN
(Wireless Local Area Network) must use the same
SSID. The default setting is default.
Wireless Mode:
Click on the pull-down menu; select from the
following options:
Infrastructure - connecting to the WLAN
using an Access Point.(This is the default
setting).
Ad-Hoc – wireless mode used when
connecting directly to a computer equipped
with a wireless adapter in a peer-to-peer
environment.
Data Encryption:
Select Enabled or Disabled.
Authentication:
Choose one of the following modes:
Open Authentication – the DWL-650 is
visible to all devices on the network
Shared Authentication – allows
communication only with other devices with
identical WEP settings
Auto – will automatically adjust to the Authentication mode of the wireless
Access Point or Router
Key Length:
Select the key length and either ASCII (e.g., a word) or hexadecimal format.
Keys 1-4:
Select the default key
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
IP Settings:
When you click IP Settings in the Configuration window, the pop-up screen above will
appear. Configure the IP Settings in this window.
Click Apply to save changes.
Configuration
IP Settings
13