Download Print this page

La Crosse Technology WT-3129Sx1 Quick Start Manual page 2

12” atomic wall clock

Advertisement

P OWE R U P
1. Select Time Zone and DST ON or OFF.
2. Insert 1 AA battery into the
OPTIONAL: Insert 2 AA batteries into the Side Battery
Compartments for an extended 3 year battery life.
IMPORTANT: Be sure all batteries are of the same voltage level.
3. For best reception, place your clock on a wall that faces Ft.
Collins, Colorado. During the night, your clock will set itself.
IMPORTANT:
• Hands will move to 12:00 and search for the Atomic Time Signal.
• If no signal, after 8-10 minutes, clock will run from 12:00.
• Clock will continue to search for the WWVB Atomic Time Signal.
• Allow up to 5 nights for the clock to receive the Atomic Time
Signal.
MAN UALLY S ET T IM E
• In certain areas, your clock may not be able to receive the
Atomic Time Signal. due to signal strength or interference.
• In this case, your clock can be set manually and operate as a
quartz clock until the WWVB signal can be received.
.
Center Battery Compartment
Page | 2
1
3
4
5
Side Battery
Compartment
Set Time:
1. Hold SET for 3 seconds
2. Press and Hold SET to move hands quickly.
3. Press and release SET to move hands forward step by step.
Note: The atomic time signal will override manual settings.
Reset:
• If the clock does not respond when trying to manually set
your time, press the RESET button on the movement case.
L E T ' S B E SO C I A L!
Follow us on our social media outlets for the latest promotions,
product support, and awesome giveaways.
1
SET
2
WAVE (Atomic search)
2
3
RESET
4
Center Battery Compartment
5
Time Zone Selector
6
Daylight Saving Time Selector
6
Page | 3

Advertisement

loading

This manual is also suitable for:

Wt-3129bx1112018