La Crosse Technology WT-3161WHx1 Manual

POWER UP
1. Select Time Zone and DST ON or OFF.
2. Insert 1 AA battery into your clock. OPTIONAL: Insert 2 AA
batteries in the side compartments, for 3 year battery life.
3. For best reception, place your clock on a wall that faces Ft.
Collins, Colorado. During the night, your clock will set itself.
IMPORTANT:
• Hands will move to 12:00 and search for the atomic time
signal.
• If no signal, after 8-10 minutes, clock will run from 12:00.
• Clock will continue to search for the WWVB atomic time
signal.
• Allow up to 5 nights for the clock to receive the atomic time
signal.
MANUALLY SET TIME
• In certain areas, your clock may not be able to receive
the atomic time signal due to signal strength or interference.
• In this case, your clock can be set manually and operate as a
quartz clock until the WWVB signal can be received.
AA
Page | 2
1
2
3
4
6
5
Set Time:
1. Hold SET for 3 seconds
2. Press and Hold SET to move hands quickly.
3. Press and release SET to move hands forward step by step.
Note: The atomic time signal will override manual settings.
Reset:
If the clock does not respond when trying to manually set your
time, press the RESET button on the movement case.
LET'S BE SOCIAL!
Follow us on our social media outlets for the latest promotions,
product support, and awesome giveaways.
1
SET
2
WAVE (Atomic search)
3
RESET
4 Battery
5
Time Zone Selector
6
Daylight Saving Time
Selector
Page | 3