Fujitsu Plasmavision P50XHA10WS Service Manual page 30

Model : P50XHA10E
VCR
Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.)
Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)
To SCART output
To SCART input
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
To video output
To S-video output
To audio output
To audio input To S-video input To video input
An example of the underside of the display
(with the P-TE1010E installed in the P42VHA10)
- 12 -