USING THE REMOTE CONTROL PUTTING BATTERIES IN THE REMOTE CONTROL 1 To remove the cover, slide it outwards while pressing it down. PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet;...
USING THE REMOTE CONTROL (Continued) EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver. Left 30°...
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model.
Page 14
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Speaker VCR or other external components See P. DVD player E-14 Display Satellite tuner Speaker (optional) Remote control...
Page 15
• Connect the video signal cable to either the S-video input terminal or the video input terminal. To audio outputs To video output To S-video output To audio inputs Note • Unplug the power cord from the AC outlet before you connect external components. •...
Page 16
To video output To S-video output To audio outputs To component video output To video output To S-video output To component video output To audio outputs component video input To S-video To audio input inputs To component video input To audio To S-video inputs input...
Page 17
To RGB output (DVI-D) To RGB output (mD-sub) To audio output To RGB2 input (mD-sub) To audio To RGB1 input input (DVI-D)
Page 19
When the volume adjustment button is pressed...
OTHER BASIC OPERATIONS CONVENIENT FUNCTIONS On-screen information (DISPLAY) Press The mode is indicated on the screen for 5 seconds. Picture Mode (PICTURE MODE) Press This button can be used to switch the picture mode. In the picture mode, you can switch between the set status and the fine mode. * For the picture mode settings, see “Setting Picture Mode (P.
Page 32
PICTURE POSITION/SIZE AUDIO “FEATURES” selected in the main menu screen FEATURES FACTORY DEFAULT On Screen Menu screen “Language” selection screen...
FACTORY SETTINGS Main corresponding signals (RGB mode) Display (dots x lines) Horizontal frequency (kHz) Vertical frequency (Hz) Signal DVI-D Main corresponding signals (Comp.video mode) Main corresponding signals (Video, S-video mode) Horizontal Vertical Horizontal Vertical Signal Signal frequency (kHz) frequency (Hz) frequency (kHz) frequency (Hz) E-41...
CLEANING AND MAINTENANCE Precautions Cleaning the Screen HANDY TIPS Problem Cleaning the Cabinet and Remote Control Cleaning the ventilation grille Action E-45...