Advertisement
2
Straighten your hair
Ensure that you select a temperature setting that is suitable for your hair.
Always select a low setting when you use the straightener for the first time.
Hair Type
Coarse, curly, hard-to-straighten
Fine, medium-textured or softly waved
Pale, blonde, bleached or color-treated
1 Connect the plug to a power supply socket.
2 Set the on/off switch ( ) to 'I'.
The light of temperature setting (
»
display to indicate that the appliance is heating up to the setting.
3 Use the
temperature setting for your hair.
The lights up to the selected temperature setting (
»
display to indicate that the appliance is heating up to this setting.
When the lights up to the selected temperature setting stop
»
flashing, the appliance has heated up and is ready to use.
4 The active cooling system is automatically activated when the appliance
is switched on. It directs a cool airflow at your hair immediately after it
has passed the straightening plates, which prevents damage to your hair.
The active cooling light (
»
cooling system is activated, and the appliance produces a varying
sounds. This is normal and does not affect the performance of the
cooling system.
To switch off/on the active cooling system, press and hold the active
»
cooling button
5 Push the lock trigger to unlock the appliance ( ).
6 Comb your hair and take a section that is not wider than 5cm for
straightening.
button ( ) and
( ) until the active cooling light goes out/on.
Temperature Setting
Mid to High (3 to 5)
Low to Mid (1 to 3)
Low (below 3)
) '1' starts flashing on the
button ( ) to select a suitable
) goes on to indicate that the active
) flash on the
Advertisement
