Set Auto Scart; Set Usb Break-In; Select Monitor Out - Philips 22HFL3350D/10 Setup Manual

• Time download
Set the time of the clock display
automatically via Teletext. The clock will be
automatically synchronised to the correct
time.
• Download Program
Select the time from the teletext
transmission of a channel. Make this
download program the same as the startup
channel.
• Time offset
Set the time difference between the time
received from Teletext to the current time
at your location.
• Buzzer volume
Set the volume of the alarm buzzer.
7. Press ï to select Store - go right and
press Æ to save setting.
7�12 Set auto scart
Set the TV to switch to the source where scart
signal is detected.
1. Enter Setup menu.
2. Press ï to select Auto scart.
Setup menu
Maximum volume 100
Switch on channel
Power on
Low power standby
Clock
Auto scart
USB break-in
Monitor out
3. Press Æ to enter Auto scart.
4. Press Î or ï to select the desired option.
• AV1
Select to switch TV automatically to AV1
when scart cable is connected to the AV1
connector.
• Power ON SCART
Select to switch the TV on from standby
Auto scart
AV1
Power ON SCART
Off
mode when a scart signal is detected or
when no scart signal is detected the TV will
go to standby mode.
• Off
Switch off this feature.
5. Press ï to select Store - go right and
press Æ to save setting.
7�13

Set USB break-in

Set the TV to automatically detect USB devices.
1. Enter Setup menu.
2. Press ï to select USB break-in.
Setup menu
Switch on channel
Power on
Low power standby
Clock
Auto scart
USB break-in
Monitor out
Blank current Channel
3. Press Æ to enter USB break-in.
4. Press Î or ï to select the desired option.
• On
Enable plug and play auto detection of USB
devices.
• Off
Disable plug and play auto detection of USB
devices.
5. Press ï to select Store - go right and
press Æ to save setting.
7�14

Select monitor out

Select to output audio and video from TV via
relevant AV connectors.
1. Enter Setup menu.
2. Press ï to select Monitor out.
USB break-in
On
Off
EN-21