Setup menu
Local keyboard locked
Remote control
OSD display
Switch on volume 50
Maximum volume 100
Switch on channel
Power on
Low power standby
3.
Press
Æ to enter Power on.
4.
Press
Î or ï to select the desired status.
•
On
The TV will always turn on after the mains
power is connected.
•
Standby
The TV will always turn to standby after the
mains power is connected.
•
Last status
The TV will always turn on the last power
status after the mains power is connected.
5.
Press
ï to select Store - go right and
press Æ to save setting.
7�10
Set
low power standby
Set the different power saving option when the
TV is in standby mode.
1.
Enter
Setup menu.
2.
Press
ï to select Low power standby.
Setup menu
Remote control
OSD display
Switch on volume 50
Maximum volume 100
Switch on channel
Power on
Low power standby
Clock
3.
Press
Æ to enter Low power standby.
4.
Press
Î or ï to select the desired status.
EN-20
Power on
On
Standby
Last status
Low power standby
Green
Fast
•
Green
The TV will enter a low standby mode to
achieve minimum power consumption.
•
Fast
The TV will enter a semi-standby mode to
achieve fast power up.
5.
Press
ï to select Store - go right and
press Æ to save setting.
7�11
Select clock
Select and configure the clock settings.
1.
Enter
Setup menu.
2.
Press
ï to select Clock.
Setup menu
Switch on volume 50
Maximum volume 100
Switch on channel
Power on
Low power standby
Clock
Auto scart
USB break-in
3.
Press
Æ to enter Clock.
4.
Press
Î or ï to select the setting that you
want to configure.
5.
Press
Æ to select the settings.
6.
Press
Î or ï to select options or make
adjustment.
• Display standby
Set the brightness level of the clock display
when the TV is in standby mode.
• Display ON
Set the brightness level of the clock display
when the TV is switched on.
• Time setting
Set the time of the clock display manually.
Note
D
This option is only available if Time
download is OFF.
settings
Display standby
Display ON
Time setting
Time download
Download Program
Time offset
Buzzer volume