Table of Contents
Advertisement
2.2 FRONT PANEL
The Vega Video's front panel consists of:
•
•
•
2.3 LED DESCRIPTION
Eight LED options indicate a different camera status, as follows:
• LAN1, 2, 3, 4: information on the relevant LAN port activity
• GSM: information on GSM registration (only for the Vega Video GPRS)
• HDD: information on the Hard-disk or memory stick connection
• WLAN: information on the LAN wireless connection
• PWR: Vega Video's power
The LEDs can act as follows:
LAN 1, 2, 3, 4
LAN port not in
OFF
use
Blinking
LAN port activity
LAN port is
ON
connected
When the Vega Video is powered, the device goes through the following stages:
1. Vega Video's power: PWR LED is ON.
2. Start of the Operating System: GSM, HDD and WLAN LEDs stay ON for about 15 seconds.
3. GSM unit identification.
4. WLAN unit identification: WLAN LED blinks immediately in case of WiFi problems.
5. Start of the image capture after about 2 minutes: blinking WLAN LED.
18
8 LEDs
1 HDD button
1 RST button
GSM
GSM unit is
OFF
GSM unit is
registered
Registered to
the GPRS
network
HDD
External
Image capture
memory is not
is OFF
active
Image capture
-
is ON
External
memory is
active
WLAN
PWR
Vega Video is
OFF
-
Vega Video is
-
ON
Advertisement
Table of Contents
