Other Features; Set The Alarm Timer - Philips MCD107/93 User Manual

Select sampling rate
You can select the Linear Pulse Code
Modulation (LPCM) output sampling rate. The
higher the sampling rate, the better the sound
quality.
1
Press SYSTEM MENU.
2
Select [AUDIO SETUP] (audio setup) >
[DOWN SAMPLE] (down sample), then
press .
3
Select an option, then press OK.
48K]: For discs recorded at sampling
• [
rate of 48kHz.
96K]: For discs recorded at sampling
• [
rate of 96 kHz.
• [ 192K]: For discs recorded at
sampling rate of 192 kHz.
4
Press SYSTEM MENU to exit.
Enable night mode
Night mode makes loud sound level softer so
that you can watch the DVD movies at a low
volume, without disturbing others.
1
Press SYSTEM MENU.
2
Select [AUDIO SETUP] (audio setup)
> [NIGHT MODE] (night mode), then
press .
3
Select an option , then press OK.
[ON] (on): Enjoy quiet viewing at
•
night.
[OFF] (off): Enjoy surround sound
•
with its full dynamic range.
4
Press SYSTEM MENU to exit.
EN
22

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. The
DISC, USB or TUNER is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold TIMER.
3
Press DISC, TUNER or USB to select a
source.
4
Press TIMER to confirm.
The hour digits are displayed and begin
»
to blink.
5
Press / to set the hour.
6
Press TIMER to confirm.
The minute digits are displayed and
»
begin to blink.
7
Press / to set the minute.
8
Press TIMER to confirm.
» The timer is set and activated.
Activate and deactivate alarm timer
1
Press TIMER repeatedly to activate or
deactivate timer.
If timer is activated, the display shows
»
.
» If timer is deactivated,
the display.
Tip
•
Alarm timer is not available in MP3 LINK
mode.
•
If DISC/USB source is selected and the
track cannot be played, tuner is activated
automatically.
disappears on