Program Radio Stations Manually; Select A Preset Radio Station; Adjust Sound; Adjust Volume Level - Philips MCD107/93 User Manual

Program radio stations
manually
Note
•
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press PROG/ANGLE to activate program
mode.
» [PROG] blinks on the display.
3
Press / to allocate a number (1 to 20)
to this radio station, then press PROG/
ANGLE to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the steps above to program other
stations.
Tip
•
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

1
Press / to select a preset number.
Tip
•
Position the antenna as far as possible from
TV, VCR or other radiation source.
•
For optimal reception, fully extend and adjust
the position of the antenna.
EN
18

7 Adjust sound

Adjust volume level

1
During play, press VOL +/- to increase/
decrease the volume level.

Select a preset sound effect

1
During play, press DSC repeatedly to
select:
• [POP] (pop)
• [JAZZ] (jazz)
• [CLASSIC] (classic)
• [ROCK] (rock)

Enhance bass

1
During play, press DBB to turn on or off
dynamic bass enhancement.
» If DBB is activated, DBB is displayed.

Mute sound

1
During play, press MUTE to mute/unmute
sound.