Blending After Steaming - Philips AVENT SCF870 Manual

Blending after steaming

1 Grab the jar handle and lift the jar off the motor unit. Turn the jar around and
shake it so that the food falls down onto the blade unit.
Only touch the jar handle. The lid, bottom and outer surface of the jar are hot.
2 If necessary, remove the lid and add additional ingredients for blending (e.g. water
or oil).
Always make sure that the lid of the jar and the lid of the water tank have cooled
down after steaming before you open them to add more ingredients to the jar or to
remove the remaining water from the water tank.
After you have put liquids in the jar, never put the jar in the steaming position.
3 Place the jar upright on the motor unit, i.e. with the lid upwards. Make sure the
handle is on the right-hand side and positioned between the two ridges of the
locking area.
4 Turn the control knob to the blending position. Hold the knob in this position until
the food is properly blended.
- English 12 -