Blending Quantities And Processing Times - Philips HR1652 User Manual

ENGLISH
8

Blending quantities and processing times

Ingredients
Batters
2 Attach the blender bar to the motor unit ('click') (Fig. 2).
3 Put the plug in the wall socket.
4 Immerse the blade guard completely in the ingredients.
5 Press the on/off button or the turbo button to switch on the appliance (Fig. 3).
-
speed, the shorter the processing time required.
- The speed ring has settings from 1 (low speed) to 20 (high speed).
- When you use the turbo speed button, the appliance operates at maximum speed. In this case,
6 Move the appliance slowly up and down and in circles to blend the ingredients.
Medium chopper (HR1652 only)
The chopper is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled
eggs, garlic, herbs, dry bread etc. The medium chopper is supplied with a blade unit with straight
below you have to use the blade unit with straight blades. Use the ice-crushing blade unit with
serrated blades for crushing ice cubes only.
Be very careful when you handle the blade units, the blades are very sharp. Be particularly careful
when you remove the blade unit from the chopper bowl, when you empty the chopper bowl and
during cleaning.
Caution: Do not process more than 1 batch without interruption. Let the appliance cool down
for 5 minutes before you continue processing.
Note: Cut large ingredients into pieces of approx. 2cm before you process them.
1 Put the blade unit in the chopper bowl (Fig. 4).
2 Put the ingredients in the chopper bowl.
See the table for the recommended quantities and processing times.
Medium chopper quantities and processing times (HR1652 only)
Ingredients
Onions and eggs
Meat
Herbs
Blending quantity
100-200g
100-400ml
100-500ml
100-1000ml
Chopping quantity
200g
200g
30g
Time
30sec.
60sec.
60sec.
60sec.
Time
5 x 1sec.
10sec.
10 x 1sec.
Speed
Turbo
15-20
15-20
15-20
Speed
1-5
turbo
10-15