Passive Stylus; Removing The Stylus; Installing The Stylus - Dell Latitude 5430 Rugged Service Manual

Passive stylus

Removing the stylus

Prerequisites
1. Follow the procedure in before working inside your computer.
About this task
The following images indicate the location of the stylus and provide a visual representation of the removal procedure.
Steps
1. Slide the stylus out using the groove on the stylus pen.
NOTE: Avoid pulling the stylus with the stretchable thread.
2. Loosen the knot and slip the stylus through the hole to remove the tether from the chassis.

Installing the stylus

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the stylus and provides a visual representation of the installation procedure.
Removing and installing components 27