Makita PV001G Instruction Manual page 10

2. Attach the straight end of the loop handle over the
mounting hole on side of the tool head, fitting the guide
ridges on the handle end well into the guide grooves
around the mounting hole.
4
1
Fig.8
► 1. Straight end of loop handle 2. Spindle
3. Mounting hole 4. Guide ridge 5. Guide groove
3. Hold the loop handle and pull the loop end over
the mounting hole on the other side of the tool head,
refining angles to engage the handle position.
4. Install and tighten the hex bolts into the mounting
holes on both sides of the tool head to secure the loop
handle in place.
Fig.9
► 1. Loop end of loop handle 2. Mounting hole
5
3
2
2
1
NOTE: The loop handle has an asymmetric shape
that can be applied for left or right hand, making
it more comfortable for you to grip and easy for
polishing.
3
4 2
Fig.10
► 1. Loop handle 2. Tool head 3. Hex bolt 4. Hex
wrench
NOTE: The loop handle can be laid down back and
forwards according to your preferred position. Loosen
the hex bolts, move the handle to your desired angle
and then refasten the bolts to lock the angle.
1
Fig.11
► 1. Loop handle 2. Hex bolt
Installing side grip
CAUTION:
both hands, positioning one hand on the switch
handle and the other on the loop handle, side grip
or tool head.
1
CAUTION:
installed securely before operation.
10 ENGLISH
1
1
3
2
Be sure to hold the tool firmly with
Make sure that the side grip is