Black & Decker BWDS Instruction Manual page 10

SET UP & USE
Follow the same steps to assemble the right side:
Attach another side of a REINFORCING BAR to RB2-1 . Align the holes and Insert
45L (BUTTERFLY SCREW) through RB2-1 first and then through the reinforcing bar.
Attach another side of a REINFORCING BAR to RF1-1 . Align the holes and Insert
45L (BUTTERFLY SCREW) through RF1-1 first and then through the reinforcing bar.
Attach one side of the remaining REINFORCING BAR to RB2-2 . Align the holes
and Insert 45L (BUTTERFLY SCREW) through RB2-2 first and then through the
reinforcing bar.
Page 10
RF1-1
RB2-1
RB2-2