Makita GVP01 Instruction Manual page 9

1. Place the loop handle over the tool head by pass-
ing the tool head through the loop of the handle.
2
Fig.7
► 1. Loop handle 2. Tool head
2. Attach the straight end of the loop handle over the
mounting hole on side of the tool head, fitting the guide
ridges on the handle end well into the guide grooves
around the mounting hole.
4
1
Fig.8
► 1. Straight end of loop handle 2. Spindle
3. Mounting hole 4. Guide ridge 5. Guide groove
3. Hold the loop handle and pull the loop end over
the mounting hole on the other side of the tool head,
refining angles to engage the handle position.
1
5
3
2
4. Install and tighten the hex bolts into the mounting
holes on both sides of the tool head to secure the loop
handle in place.
Fig.9
► 1. Loop end of loop handle 2. Mounting hole
NOTE: The loop handle has an asymmetric shape
that can be applied for left or right hand, making
it more comfortable for you to grip and easy for
polishing.
3
4 2
Fig.10
► 1. Loop handle 2. Tool head 3. Hex bolt 4. Hex
wrench
9 ENGLISH
2
1
1
1
3
1