Remote Control; Prepare The Remote Control - Philips 7000 Series User Manual

Remote control

This section includes an overview of the
remote control.
(Standby-On) button
①
• Switch the soundbar On or to
standby.
② EQ (Mode)
Select from the four EQ modes:
Movie/Music/Voice/Stadium.
③ HDMI ARC
Switch your source to HDMI ARC
connection.
④ Pair / BT
Short press to switch to Bluetooth
source. The soundbar will reconnect to
the last paired device if it's available.
Press and hold for 3 seconds to
disconnect from all Bluetooth devices
and enter pairing mode.
/
(Previous / Next)
⑤
Skip to the previous or next track in
USB/ BT mode.
(Play / Pause)
Start, pause or resume play in USB/ BT
mode.
VOL+ / VOL- (System volume)
Increase /decrease system volume level.
⑥ Optical
Switch your audio source to the optical
connection.
⑦ AUX/USB :
Switch your audio source to the
AUX/USB connection.
⑧ - TREBLE
Decrease the soundbar's treble volume.
⑨ +TREBLE
Increase the soundbar's treble volume.
8 EN
-BASS
10
Decrease the subwoofer's volume.
+BASS
Increase the subwoofer's volume.
11
1
3
5
6
8
10

Prepare the remote control

• The provided remote control allows the
unit to be operated from a distance.
• Even if the remote control is operated
within the effective range 19.7 feet
(6m), remote control operation may be
impossible if there are any obstacles
between the unit and the remote
control.
• If the remote control is operated near
other products which generate infrared
rays, or if other remote control devices
using infra-red rays are used near the
unit, it may operate incorrectly.
Conversely, the other products may
operate incorrectly.
2
4
7
9
11