Dell OptiPlex 7000 Tower Service Manual page 108

Table 7. System setup options—Integrated Devices menu (continued)
Integrated Devices
Audio
Enable Audio
Serial Port
Serial Port Configuration
USB Configuration
Front USB Configuration
Rear USB Configuration
Miscellaneous Devices
Dust Filter Maintenance
Table 8. System setup options—Storage menu
Storage
SATA Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
SATA-0
Type
Device
SATA-1
Type
Device
SATA-2
Type
108 BIOS setup
Enable or disable the integrated audio controller.
By default, all the options are enabled.
Enable or disable the serial port address.
By default, the COM1: Port is configured at 3F8h with IRQ4 option is
enabled.
● Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.
By default, all the options are enabled.
Enable or disable the individual front USB ports.
By default, all the options are enabled.
Enable or disable the individual rear USB ports.
By default, all the options are enabled.
Enable or disable the PCI Slot
By default, the option is enabled.
Enable or disable the dust filter maintenance.
By default, the Disabled option is enabled.
Enable or disable the operating mode of the integrated SATA hard drive
controller.
By default, the AHCIoption is enabled.
Enable or disable the onboard drives.
By default, all the options are enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the SATA HDD type information of the computer.