Sony SU-600MD Instructions For Use Manual page 7

Notes
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
Attaching to the monitor
Accessories supplied
• Base unit (1)
• Neck unit (1)
• M5 × 20 Screws (4)
• M4 × 14 Screws (4)
• Instructions for Use (1)
• Service Contact List (1)
Attaching method
1
Assemble the monitor stand.
Insert the base unit to the neck unit
with the supplied M5 × 20 screws (4)
Base unit
Neck unit
2
Place the monitor on a soft cloth, etc., and remove
the M4 screws (4) when they are attached to the
monitor.
3
Attach the monitor stand with the supplied M4 × 14
screws (4).
Soft cloth
4
, and fix it
1
.
2
Connect the cables to the monitor.
GB
3
GB
Attaching to the monitor