What To Do If; Trouble Shooting - AEG KO-LAVAMAT 74335 User Information

What to do if ...

Trouble Shooting

Try to rectify minor faults on the washing machine with the aid of the
instructions given here. If you call out an engineer to resolve a fault
listed here, or to repair a fault caused by incorrect use or installation, a
charge will be made even if the appliance is under guarantee.
Problem
The washing machine
does not work.
Door cannot be closed.
The DOOR and MAIN
WASH displays are
flashing.
No water is running
into the machine.
The RINSE + display is
flashing.
Possible Cause
The mains plug is not
plugged in.
The circuit breaker at the
household power distribu-
tion box has tripped or a fuse
at the household fuse box
has blown.
The door is not correctly
closed.
START/PAUSE button has not
been pressed long enough.
The child safety feature is
set.
The door is not correctly
closed.
Tap is closed.
Filter in screw connection of
the inlet hose is blocked.
Water tap is blocked with
limescale or is faulty.
Operating Instructions
Solution
Insert mains plug.
Re-set the circuit breaker or
replace the fuse.
Close the door; The lock must
engage audibly.
Press and hold down the
START/PAUSE button until
the programme starts.
Cancel the child safety fea-
ture (see the section "Child
Safety Feature").
Close the door correctly.
Start the programme again.
Open tap.
Turn off the water tap. Un-
screw the hose from the tap,
remove the filter and clean it
under running water.
Check water tap and have it
repaired if necessary.
29