AEG KO-LAVAMAT 72620 Instruction Book page 30

Operating instructions
Malfunction
Washing is not spun
properly, water is still
visible in the drum.
Fault code
played.
Door cannot be opened
when the machine is
switched off.
Remnants of detergent
are building up in the
detergent drawer.
Rinse water is cloudy.
When an additional
program button is
pressed, the corre-
sponding indicator
does not illuminate.
30
Drain hose is kinked.
Maximum pumping height
(drain height 1m above the
floor on which the machine
is standing) exceeded.
(2
is dis-
Circulation pump is blocked.
In the case of siphon con-
nection: siphon is blocked.
The door is locked for safety
reasons (K/DOOR indicator
is off).
Tap is not fully open.
The sieve in the threaded fit-
ting on the water inlet hose
at the tap is blocked.
Sieve on threaded fitting for
the water inlet hose on the
machine is blocked.
The cause is probably a
detergent with a high silicate
content.
The additional program
selected cannot be combined
with the program set.
Possible Cause Remedy
Remove kink.
Please contact customer
service who have a retrofit
kit for pumping to heights of
greater than 1m.
Switch off the machine and
unplug from the mains, clean
the circulation pump.
Clean siphon.
Wait until the K (DOOR)
indicator is green.
Open tap fully.
Clean sieve.
Clean sieve.
No negative impact on the
rinsing results, possibly use
liquid detergent.
Make another choice.