Starting The Washing Program - AEG KO-LAVAMAT 72620 Instruction Book

Starting the Washing Program

0 1. Check whether the water tap is open.
2. Start the washing program: press the O/s (START/
PAUSE) button.
The washing program is started, or starts at the end of
the time delay set.
If the K (DOOR) indicator flashes red when the O/s (START/PAUSE)
3
button is pressed, the door is not properly closed. Close the door firmly
and press the O/s (START/PAUSE) button again.
If the delay timer has been set:
The start time delay set on the delay timer counts down; the time
remaining until the program starts is displayed on the multi-display (in
whole hours remaining). During this time you can add washing, change
or stop the delay timer.
• Adding washing: press the O/s (START/PAUSE) button, the door
can be opened. Then close the door and press the O/s (START/
PAUSE) button again.
• Changing or stopping delay timer: press the b (DELAY TIMER) button
repeatedly until the desired time is displayed; when the program
duration is displayed (display in minutes, e.g.119), the washing pro-
gram starts without delay.
Operating instructions
21