RIDGID IN625301AV Operator's Manual page 13

Troubleshooting (Continued)
TROUBlE
Compressor 1. Loose rubber feet on tank
vibrates
2. Loose pump / motor mounting bolts
Air output lower 1. Broken inlet valves
than normal
2. Connections leaking
Motor runs but no Belt worn / broken
air output
PROBABlE CAUSE
13
REMEDY
1. Tighten screw holding rubber feet
2. Tighten pump / motor mounting bolts
1. Have authorized service representative
repair unit
2. Tighten connections
Replace belt (and other parts in belt kit)