Saving Channel Presets; Using The Sirius Menu - Pioneer VSX-817-S/-K Operating Instructions Manual

10 Other connections
Tip
• You can select channels directly by
pressing D.ACCESS (SHIFT+ENTER) then
the three-digit channel number.
• You can press TUNER DISP (SHIFT+ 1) to
change SIRIUS Radio information in the
front panel display.
• The currently selected channel is
automatically chosen (without pressing
ENTER) after 10 seconds.

Saving channel presets

This receiver can memorize up to 30 channels,
stored in three banks, or classes, (A, B and C)
of 10 stations each.
1 Select the channel you want to memorize.
See Selecting channels and browsing by genre
above.
2 Press T.EDIT.
The display shows a blinking memory class.
3 Press CLASS (SHIFT+ 2) to select one of
the three classes then press
the channel preset you want.
You can also use the number buttons to select
a preset.
4 Press ENTER .
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the SIRIUS channel.
Tip
• You can also press
display to save the information of up to 8
songs. See Using the SIRIUS Menu below
to recall this information.
56
En
to select
during reception
Listening to channel presets
You will need to have some presets stored to do
this.
1 Press CLASS (SHIFT+ 2) to select the class
in which the channel is stored.
Press repeatedly to cycle through classes A, B
and C.
2 Press to select the channel preset
you want.
• You can also use the number buttons on the
remote control to recall the channel preset.

Using the SIRIUS Menu

The SIRIUS Menu provides additional SIRIUS
Radio features.
1 Press TOP MENU .
2 Use to select a menu item then press
ENTER .
Choose between the following menu items:
• Memory Recall – Use
saved song information (see Tip above).
• Channel Skip/Add – Use
to select channels you would like to
remove/restore from/to the channel guide.
• Parental Lock – Use
select channels you would like to place
under parental lock. Channels put under
parental lock are not displayed in the
Channel Guide, but may be accessed by
directly inputting their channel number
and providing the parenal lock password.
• Antenna Aiming – Check the strength of
satellite and terrestrial reception.
• Password Set – Set the parental lock
password.
3 When you're finished press TOP MENU to
return to the reception display.
tp browse your
and ENTER
and ENTER to