Playing Discs; Basic Playback Controls; Resume And Last Memory - Pioneer S-DV535 Operating Instructions Manual

01 Getting started

Playing discs

The basic playback controls for playing DVD,
CD, Video CD/Super VCD, DivX video and MP3/
WMA discs are covered here. Further functions
are detailed in chapter 3.
1 If the player isn't already on, switch it on.
If you're playing a DVD or Video CD/Super VCD,
also turn on your TV and make sure that it is set
to the correct video input.
2 Press OPEN/CLOSE to load a disc.
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you're
loading a double-sided DVD disc, load it with
the side you want to play face down).
3 Press (play) to start playback.
If you're playing a DVD or Video CD/Super VCD,
a menu may appear. See DVD-Video disc
menus and Video CD/Super VCD PBC menus on
page 9 to navigate these.
If you're playing a DivX video or WMA/MP3
disc, it may take a few seconds before playing.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Playing a
JPEG slideshow on page 15 for more on this.
• If a disc contains a mixture of DivX video
and other media file types (MP3, for
example), first select whether to play the
DivX video files (DivX) or the other media
file types (MP3 / WMA / JPEG) from the on-
screen display.
4 Adjust the volume.
Use the MASTER VOLUME/VOLUME control.
Note
1 You may find with some DVD discs that some playback controls don't work in certain parts of the disc.
2 • The Last Memory function may not work with some discs.
• For DVD-Video discs (except VR mode DVD-RW), the player stores the play position of the last five discs.
8
En

Basic playback controls

The following table shows the basic controls on
the remote for playing discs
other playback features in the chapter 3.
Button What it does
Starts/resumes normal playback.
• If the display shows Resume or Last
Mem playback starts from the resume
or last memory point (see Resume and
Last Memory below).
Pauses/unpauses a disc.
Stops playback or cancels the resume
function (if the display shows Resume ).
Press to start fast reverse scanning.
Press to start fast forward scanning.
Skips to the start of the current track or
chapter, then previous tracks/chapters.
Skips to the next track or chapter.
Numbers Use to enter a title/chapter/track
number. Press
• If the disc is stopped, playback starts
from the selected title (for DVD) or
track (for CD/Video CD/Super VCD).
• If the disc is playing, playback jumps
to the start of the selected title (VR
mode DVD-RW), chapter (DVD-Video)
or track (CD/Video CD/Super VCD).

Resume and Last Memory

When you stop playback of a disc, Resume
shows in the display indicating that you can
resume playback from that point.
With DVDs and Video CD/Super VCDs, even if
ejected, the play position is stored in memory.
The next time you load the disc, the display
shows Last Mem and you can resume play-
back.
1
. You can find
ENTER
to select.
2