For Safety In Operation; Static Electricity; Using The Language Code List - Pioneer S-DV535 Operating Instructions Manual

10 Additional information
speaker. If this occurs, move your unit to a
different place. When the microwave is not
in use, there will be no radio wave
interference.

For safety in operation

Do not use the system in the proximity of
electronic equipment that requires high-
accuracy control or handling of very low-level
signals, such as:
• Hearing aids, cardiac pacemakers, other
electrical medical equipment, fire alarms,
automatic doors, and other automated
control equipment.
The system may affect the electronic
equipment, causing malfunction or accident.
• If you use a pacemaker or other electrical
medical equipment, consult the
manufacturer or dealer to check the effects
of radio waves on it.
Do not use the system in places where its use
is prohibited, for example near aircraft
equipment and in hospitals.
The system may affect electronic equipment or
electrical medical equipment, causing an
accident. Follow the instructions given by the
aircraft company or medical institution.
Important
• We do not assume any liability for the
damages incurred due to improper use of
the product by the user or third party,
malfunction during use, other troubles or
use of the product, unless indemnity for
damages is admitted by the law.
46
En

Static electricity

Static electricity or other external influence
may cause malfunctioning of this unit. In this
case, unplugging the power cord and then re-
plugging it in will usually reset the unit for
proper operation. If this does not correct the
problem, please consult your nearest Pioneer
service center.

Using the language code list

Some of the language options (see Language
settings on page 27) allow you to set your
preferred language from any of the 136
languages listed in the Language code list.
1 Select 'Other Language'.
2 Use to select either a code letter or
a code number.
3 Use to select a code letter or a code
number.
See the Language code list (next page) for a
complete list of languages and codes.