Scheduling/Stopping Recordings - Philips 502-1040510 User Manual

4.8

Scheduling/stopping recordings

To record a programme, you must first connect
your HD receiver to your VCR or any recording
device using a SCART cable (see page 28), and
then schedule a recording using the TV guide
or by setting a recording timer.
Using TV guide
Press GUIDE
Use / / /
programme you want to record and press
OK. In the menu that pops up, press one of
the following:
• OK again to confirm the scheduling of the
recording.
• EXIT to return to the TV channel that you
were watching prior to displaying the TV
Guide.
• BACK to return to the TV Guide.
IMPORTANT NOTE:
If the scheduling is made on a 'Now'
programme (highlighted in blue), your HD
receivers starts recording instantly and
is locked on the programme to secure
its recording. Any attempt to control the
receiver displays rEC on your HD receiver's
front panel. You must STOP the recording to
recover the control of your receiver.
If the scheduling is made on a later
programme, your HD receiver will record
it at the set date and time. The program is
highlighted in red in the TV Guide.
16
to display the TV guide.
to highlight the
HOW TO STOP A RECORDING?
When a programme is being recorded, you
cannot switch to any other channel or use any
of the other features of your HD receiver. TO
STOP/CANCEL A RUNNING RECORDING
and return to normal live TV, press EXIT first
then OK immediately after.
Using recording timers
Press MENU. to display the Main menu.
Make sure that TV guide & scheduling
is highlighted and press or OK. The TV
guide & scheduling menu appears.
In the TV guide & scheduling menu, use
/ to highlight Scheduled recordings
and press or OK.
The Scheduled recordings menu appears.
To schedule a new recording, make sure
New timer is highlighted and press or
OK. The New manual recording menu
appears.
Using your HD receiver