Storage - RIDGID WD40801 Owner's Manual

STORAGE

When vacuuming is complete, your RIDGID Detachable
Wet/Dry Vac has convenient storage locations.
ACCESSORY STORAGE (Fig. 10)
1. Place the Utility Nozzle (H) on one of the Extension
Wands (G) for storage.
2. The Accessory Storage Bin, located on the back of
the Wet/Dry Vac, holds the Two Extension Wands
(G), Car Nozzle (I) and Blower Wand (J).
CORD STORAGE (Fig. 11)
1. To Store Cord: Wrap the Power Cord around the
Detachable Blower Cord Wrap.
2. Secure the Power Cord using the Cord Clip on the
Polarized Plug.
HOSE STORAGE (Fig. 12)
1. Wrap the Tug-A-Long Positive Locking Hose with
Dual-Flex (K) around the Powerhead Assembly as
shown and place the small Swivel End inside the
larger one.
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings
blocked; keep free of dust, lint, hair or anything
that may reduce air flow.
CAUTION:
Do not operate vacuum while the hose is still
wrapped around the powerhead assembly in the
storage position.
CORD STORAGE:
SP7124 WD40801 ES.indb 9 SP7124 WD40801 ES.indb 9
ACCESSORY STORAGE:
Fig. 11 HOSE STORAGE:
(A)
Detachable
Blower Cord
Wrap
Power
Cord
Cord Clip
Polarized
Plug
9
Empty Storage Bin
Accessory
Storage Bin
(J)
Fig. 10
Accessory
Storage Pins
(H)
(G)
(I)
Accessory
Storage Bin
Fig. 12
(K)
Powerhead
Assembly
9/10/21 10:19 AM 9/10/21 10:19 AM