Table of Contents
Advertisement
Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80
Figure 4. Orbi Pro WiFi 6 satellite label
Connect your Orbi Pro WiFi 6 router
The back of the router has one yellow WAN port and four LAN ports. The label on the
router displays model SXR80, and the preset WiFi network name (SSID) and password.
To cable your Orbi Pro router:
1. Connect your Orbi Pro router to a modem or gateway that provides Internet.
• If you use a modem, unplug the modem, remove and then reinsert the backup
battery if it uses one, and plug the modem back in.
• If you use a WiFi gateway, we recommend that you turn off your gateway's WiFi.
2. Use the Ethernet cable that came with your router to connect your modem or gateway
to the yellow WAN port on the back of your router.
3. Connect the power adapter to your router and plug the power adapter into an outlet.
The Power LED on the back of the router lights green.
When the bar LED on the front of the router lights solid white, the router's preset
WiFi network is ready for setup.
Overview and Setup
20
User Manual
- Quick Links:
- Set up Your Satellite with a...
Hide quick links:
Advertisement
Table of Contents
